500 x 500 img here

Latte Mug

Instructions

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-6041 #4 Soft Fan, apply 1 coat of UG-51 WhiteUnderglaze to the body of the mug.
  3. On a Mat Board, cut strips of copy paper with the Olfa WaveCutter in various widths at least as long as the mug.
  4. Use the paper to stripe the mug, leaving space between.Brush area with some water to get the paper to adhere to the Underglaze.
  5. When dry, use the SG-401 Black Designer Liner and theSG-403 Red Designer Liner to make tight horizontal lines on the emptyspace between the paper stripes.
  6. Pull off the paper. Allow to dry.
  7. Using a CB-604 #4 Soft Fan, apply 2 coats SC-74 Hot Tamaleto the inside and the handle of the Latte Cup.
  8. Using a CB-604 #4 Soft Fan, apply 2 coats of SW-001Stoneware Clear glaze to the outside of the Latte Cup (not the handle).
Products in project listed here
Code Name Image Price  
SC16-2 Sc16 Cotton Tail 2 Oz
Mayco Stroke And Coat Glaze
Sc16 Cotton Tail 2 Oz <br>Mayco Stroke And Coat Glaze
$2.62
SC74-2 Sc74 Hot Tamale Red 2 Oz
Mayco Stroke And Coat Glaze
Sc74 Hot Tamale Red 2 Oz <br>Mayco Stroke And Coat Glaze
$2.62
SG401-1 Sg401 Black Designer Liner 1 Oz
Mayco Designer Liner
Sg401 Black Designer Liner 1 Oz <br>Mayco Designer Liner
$3.29
SG403-1 Sg403 Red Designer Liner 1 Oz
Mayco Designer Liner
Sg403 Red Designer Liner 1 Oz <br>Mayco Designer Liner
$3.29